Pin Static Brinell Hardness Tester PHB-150
Original price was: $2,000.00.$1,600.00Current price is: $1,600.00.
Test Force 1,580 kgf
Indenter: 7.26mm Steel ball indenter
test range 100~350HBW
4mm Carbide ball Indenter,
test range 350~650HBW
Indicator Error: ≤2~3% Comply with ISO, ASTM
Repeatability Error:≤2~3% Comply with ISO, ASTM
Test Range: 100~650HBW
Opening dimension: 150mm(Height) x100mm(Throat Depth)
Net Weight : 4.2 kg
Application: Castings, Forgings, Steel Products, Heat Treatment
Pin Static Brinell Hardness Tester PHB-150
Pin Static Brinell hardness tester is designed following the Brinell hardness test method
Test Force 1,580 kgf
Indenter: 7.26mm Steel ball indenter
test range 100~350HBW
4mm Carbide ball Indenter,
test range 350~650HBW
Indicator Error: ≤2~3% Comply with ISO, ASTM
Introduce
The PHB-150 Pin Static Brinell hardness tester is designed following the Brinell hardness test method. The test force is controlled by a shear pin. After reading the diameter of the indention with the reading microscope, the Brinell hardness value can be obtained from the look up table. comply with ASTM E10, ASTM E110 and ISO 6506 standard
This kind of pin Brinell hardness tester is especially suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut.
The PHB-150 Pin Static Brinell hardness tester can be widely used to test the hardness of forgings, castings, steels, nonferrous metal and its alloy products, and to test the hardness of annealed, normalizing and tempered mechanical parts.
Compared to the rebound type hardness tester, the pin Brinell portable hardness tester has many advantages such as higher precision, fewer factors affecting accuracy and lower requirement on the surface roughness. The test result meets the requirements of most drawings without conversion and is more widely accepted in the international business.
Features of Pin Static Brinell Hardness Tester
 |
Test Principle It applies Brinell hardness test method |
|---|
| Flexible Application
Good force value consistency, no influence by operator. |
 |
|---|
|
|
High Accuracy
Good repeatability and high accuracy. The accuracy is the same as desk tester. It could replace Leeb hardness tester in low accuracy and reliability. |
|---|
|
|
Simple and Flexible Operation
Simple and flexible operation.Only consume 1 piece of cheap shear pin for each test. |
|---|
Technical Parameters
 |
Test Force 1,580 kgf
Indenter: 7.26mm Steel ball indenter test range 100~350HBW 4mm Carbide ball Indenter, test range 350~650HBW Indicator Error: ≤2~3% Comply with ISO, ASTM Repeatability Error:≤2~3% Comply with ISO, ASTM Test Range: 100~650HBW Opening dimension: 150mm(Height) x100mm(Throat Depth) Net Weight : 4.2 kg Application: Castings, Forgings, Steel Products, Heat Treatment |
|---|
Be the first to review “Pin Static Brinell Hardness Tester PHB-150”
Related products
Hardness tester
Brinell tester
Brinell tester
Brinell tester
Brinell tester
NDT Equipment
Brinell tester
Hardness tester
Reviews
There are no reviews yet.