Digital Storage Oscilloscope

Bandwidth: DC ~ 100MHz (3dB)

Rise Time: 3.5ns.

Bandwidth Limit: 20MHz.

Vertical Sensitivity Resolution: 8 Bit: 1mV*~10V/div.

Input Coupling: AC, DC, GND

Input Impedance: 1MΩ// 16pF approx.

DC Gain Accuracy: ±3%

Polarity: Normal & Invert.

Maximum Input Voltage: 300Vrms, CAT I

Offset Position Range: 1mV/div: ±1.25V, 2mV/div ~ 100mV/div: ±2.5V, 200mV/div ~ 10V/div: ±125V.

Waveform Signal Process: Plus, -, ×, ÷, FFT, FFTrms

User Defined Expression FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Henning, or Blackman-Harris.

Trigger Source: CH1, CH2, EXT.

Trigger Mode: Auto (supports Roll Mode for 100 MS/div and slower), Normal, Single Sequence.

Trigger Type: Edge, Pulse Width, Video, Pulse Runt, Rise & Fall, Timeout, Alternate, and Event-Delay (1~65535 events), Time-Delay (Duration, 4nS~10S), Bus.

Coupling: AC, DC, LF rej., Hf rej., Noise rej.

Sensitivity: 1div

External Trigger Range: ±15V

Sensitivity: DC ~ 100MHz Approx. 100mV

Input Impedance: 1MΩ±3%~16pF

Time base Range: 1ns/div ~ 100s/div (1-2-5 increments)

Pre-trigger: 10 div maximum

Real Time Sample Rate: 1GSa/s max

Cursors: Amplitude, Time

Gating available:

Unit: Seconds(s), Hz (1/s), Phase (degree), Ration (%).

Cursors measurement:

Voltage difference between cursors (ΔV) Time difference between cursors (ΔT)

Display: 7” TFT WVGA color display

Resolution: 800 horizontal × 480 vertical pixels (WVGA)

Interface: USB 2.0 High-speed host port X1

USB High-speed 2.0 device port X1. 5V Max/10mA TTL open collector output

Power: 220V AC, 50Hz