Basic Sensor Experimental Lab Trainer

Industrial-standard sensors and transducers With USB interface Open-ended design, ideal for expansion Offer a sensing data acquisition software

Specifications:

Power Supply Unit Fixed DC power supply

Output voltage : +5V, -5V, +12V, -12V

Max. output current : +5V3A, -5V0.3A, +12V1.5A, -12V0.3A(3)

With output overload protection

2. AD Converter: 1×12-bit ADC.

Input voltage range: 0 to +5V.

Time pulse frequency: 3.58 MHz

Control signals : Status, pole,

over range indication

3. Interface Port USB interface : Type B

4. D A Converter: 1 x 12-bit DAC Analog output & control OUT+: +DC OFFSET 0V +4.096V unipolar OUT- : -DC OFFSET 0V

– 4.096V unipolar.OUT BP : DC OFFSET -2.048V  +2.048V bipolar

5. Preset LevelMax. value : 4095.

6. Status Display & DCV Input v voltage measurement.

a. Range: 2000mV, 20V

b. Accuracy : ±0.0 of reading + 4 counts

c. Input impedance : 10MΩ

d. Display : 4 digits.

7. Mode Selector Manual or single-chip

8. Buzzer: Maximum input signal voltage : +12V.

9. Micro controller Signals 5 Control line outputs

10. Model Holder : X4.11.

Potentiometer : 100k ohm B-type.

12. Comparator V-,V+ input, Vo output

13. Differential amplifier  V-,V+ input, Vo output

14. Instrumentation amplifier V-,V+ input, Vo output,

adjustable gain  Experiment Modules:

1. Using 2mm plugs and sockets.

2. Comprehensive experiment manual

3. Modules secured in plastic housings.

4. Connected by 2mm-2mm test leads

5. Dimension : 255 x 165 x 30mm.

6. Circuit symbols, blocks and components printed on the surface of each module

7. Power supplied from KL-61001B main unit.

List of Modules Module-1.

1. Photo transistor.

2. Photo interrupter.

3. Magnetic (hall-effect)  digital

4. Magnetic (hall-effect)  analog

Module-2

1. Pyroelectric detector

2. Reed switch

3. Thermistor

4. Mercury switch

Module-3

1. Limit switch

2. Vibration switch

3. Condenser microphone

4. Dynamic microphone

Module-4

1. Gas  smoke sensor

2. Ethanol sensor

Module-5

1. IC (AD590) temperature sensor

2. Humidity sensor

(1) Humidity transducer rated voltage : 1 Vp-p AC

(2) Frequency range : 100Hz to 10KHz(3)

Temperature range : 0C to 60 C

(4) Humidity range : 20 percentage RH to 90percentageRH

(5) Impedance : 13 k oham (70percentageRH at 25C)

Module-6

1. Infrared TX  or RX sensor

(1) Infrared transmitter : Emission intensity : 12mW sr (I = 50mA) Emission wavelength : 940nm (IF = 50mA

(2) Infrared receiver : Sensitivity wavelength : 1000nm

2. Ultrasonic TX  or RX sensor Norminal frequency : 40KHz

Module-7

1. Pressure sensor 0-7 psi to 0-30 psi pressure ranges

2. Strain gauge

(1) Maximum payload : greater5kg

(2) Teminal resistance : 350 ± 50Ω

Module-8 1. Hall current sensor

(1) Nominal current : ±3A

(2) Current range : ±9A

(3) Output voltage : ±4V, RL equal 10 k Ohms

2. Proximity sensor

(1) Operation voltages : 10 to 30V DC

List of Experiments

1.     D A and AD Converters

2.     Characteristics of Sensors

3.     Gas Sensors

4.     AD590 Temperature Transducer

5.     Hall Current Sensor

6.     PT100 Temperature Sensor

7.     Humidity Sensor

8.     Strain Gauge

9.     Linear Variable Difference Transformer (LVDT)

10.   Photovoltaic Cell

11.   Proximity Switch

12.   Infrared Transducer

13.   Ultrasonic Transducer

14.   Pressure Sensor

15.   VF and FV Converters

16.   CdS Cell

17.   Level Controller

18.   Fiber Optical Communication

19.   Rotation Angle Sensor

Including Brand PC

-Processor: Intel Core i7 -14700K (14th  Generation), (33MB CPU Cache, 4.5GHz Base up to 5.6GHz), DDR-4 & DDR-5 Memory Type

CPU Cooler – Intel Core i7-14700K Processor (Cooler type -Liquid CPU Cooler, No. of Fans-3(at least), Fan Speed- must be 1500RPM to 20000RPM) Motherboard- processor intel core i7-14700K (Memory type-DDR5, Memory Slot-4 (at least-128GB), Storage slot-4, WiFi-6 built, must be integrated with external Graphics Card)RAM: 16GB (DDR5-Type, Bus Speed-6000MHz to 8000MHz), Storage: SD: 1TB at least (with GDDR5-Memory Type) Graphics Card : External Graphics Card at least 8 GB , Memory type-GDDR6 , Graphics Resolution -Quad Display (7680 x 4320) (Processor & Motherboard)Monitor at least 23.8-inch, Display Resolution: 1920×1080 (W x H) FHD, Refresh rate-100 Hz (at least) OS Windows 10/11 (Genuine Version) Mouse & Keyboard- With Computer Table- High density melamine chip board (Size- 48W×22D×35H)

Accessories

1. Experimental manual

2. Connection leads and plugs: 1 set

3.Storage Cabinet -2 Sets

4. Rack: With Necessary