Brand: CL
Model: CL-ASE2560
Pictures are for reference only.
Technical Specifications of Main Unit:
- Ardunio IDE
- Completely compatible with Arduino Standard Shield
- Programmable immediately to block program just with basic circuit without wiring
- Designed for wiring to desired pin
- The latest version Ardunio 1.0.5.
- Bread broad and various Powers usable for application
- 20 kinds of 1/O device and sensor devices
- MCU Board:
- MCU: ATmega2560
- Operating Voltage: 5V
- Input Voltage: 7-12VDC
- Input Voltage: 6-20VDC
- GPIO: 70 pin, current 50mA (Including PWM pin)
- ADC: 16Ch
- Flash Memory: 256Kbyte
- SRAM: 8Kbyte
- EEPROM: 4Kbyte
- Clock: 16 MHz.
- Compatible Shield: Compatible with Arduino Shield
- Sensor Board:
- PIR sensor: PIR motion sensing sensor, adjustable Sensitivity and Response Time
- Humidity sensor: Measuring Analog output value by Humidity, 0-100% humidity measured
- Step motor: 1.8/pulse, Wheel provided
- DC motor: Output avg. Current 1.2A, max. 3.2A, Wheel provided
- Sound sensor: Sensing after amplifying noisy around.
- Microphone Temperature sensor: Digital Temperature Measurement sensor, error 40°C-125°C (+0.5°C)
- Light sensor: Analog output by brightness, 20 Ix ~ 100 lx, connected with ADC
- Gas sensor: LNG, LPG, Propane, Butane measurable. 2,000-10,000 PPM measurable 3 axis Gyro sensor: Analog output included, measurable of Tilt
- Buzzer: Operating voltage: 5VDC
- Frequency: 2400 +50Hz;
- Current consumption: Max. 35mA
- SPL: Min. 90dB
- LED: 5PI RED LED 8EA.
- Controlled with IC chip
- RGB LED: Various colors displayable with adjusting brightness of each Red.
- Green, Blue
- TEXT LCD: 16×2 Line
- FND:
- Piezo sensor: Used as Buzzer or Speaker. Responded to Shock and Sound waves around Capacitance 10nF ± 30%
- Ultrasonic Distance sensor: NT-TS601 20cm ~400cm distance measurable
- Bluetooth module: Connectable directly with Chip Antenna, Smart phone
- DC voltage (+12V, +5V, +3.3V)
- Wiring port (corresponded to no.21 port)
- Bread board
- MCU module (compatible with Arduino Shield)
- 56MHz RFID reader
- WLAN module
- 16EA Buttons
Educational content List:
- AVR Microcontroller
- Ardnino Development Environment
- Basic Structure of Arduino Program
- FND control
- Text LCD. Buzzer control
- DC motor control
- Step motor control
- Push button control
- Light sensor, Sound sensor control
- PIR sensor control
- Temperature, Humidity and Gas sensor control Ultrasonic Distance sensor
- Piezo sensor, Gyro sensor control
- RFID reader test. Bluetooth test
- Wi-Fi test
Reviews
There are no reviews yet.