Signal Generator Frequency Meter

Brand: CL

Model: VC2060H

Pictures are for reference only.

Specifications:

Material: ABS

Color: white

Frequency parameters:

Sine wave range: 0Hz~15MHz, 0Hz~30MHz, 0Hz~40MHz, 0Hz~60MHz (optional)

Square wave range / triangle wave range:

0Hz~15MHz: 0Hz~15MHz

0Hz~30MHz: 0Hz~25MHz

0Hz~40MHz: 0Hz~25MHz

0Hz~60MHz: 0Hz~25MHz

Pulse wave range / arbitrary wave range / TTL digital signal wave:

0Hz~15MHz: 0Hz~6MHz

0Hz~30MHz: 0Hz~6MHz

0Hz~40MHz: 0Hz~6MHz

0Hz~60MHz: 0Hz~6MHz

Square wave rise time:

0Hz~15MHz: ≤25ns

0Hz~30MHz: ≤20ns

0Hz~40MHz: ≤20ns

0Hz~60MHz: ≤10ns

Pulse width adjustment range:

0Hz~15MHz: 100nS – 4000S

0Hz~30MHz: 50nS – 4000S

0Hz~40MHz: 40nS – 4000S

0Hz~60MHz: 25nS – 4000S

Min. frequency resolution: 0.01µHz(0.00000001Hz)

Frequency accuracy: +/-20ppm

Frequency stability: +/-1ppm/3H

Waveform parameters:

Waveform types: Sine/Triangle/Square/Pulse(duty-cycle adjustable)/Partial Sine/CMOS/DC Level/Half-wave/Full-wave/Pos-Ladder/Neg-Ladder/Noise/Exponential Rise/Exponential Fall/Tone/Sinc Pulse/Lorentz Pulse, and 60 kinds of user defined waveforms

Waveform length: 2048 points

Waveform sampling rate:

0Hz~15MHz: 200MSa/s

0Hz~30MHz: 200MSa/s

0Hz~40MHz: 200MSa/s

0Hz~60MHz: 266MSa/s

Waveform vertical resolution: 14 bits

Sine wave:

Harmonic suppression: ≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz) Total harmonic distortion: <0.8%(20Hz~20KHz, 0dBm) Square and pulse wave: Overshoot (Square): ≤5% Duty-cycle range (Pulse): 0.1%~99.9% Sawtooth wave: linearity: ≥98%(0.01Hz~10kHz) Output paramaters: Amplitude range: 0Hz~15MHz: frequency≤10MHz 0Vpp~20Vpp 0Hz~30MHz: 10MHz 0Hz~40MHz: – 0Hz~60MHz: frequency>30MHz 0Vpp~5Vpp

Amplitude resolution: 1mV

Amplitude stability: +/-0.5%/5H

Amplitude flatness: +/-5%(<10MHz); +/-10%(>10MHz)

Waveform output:

Output impedance: 50Ω +/-10% (Typical)

Protection: All the signal output ternianls can work within 60s under load short-circuit condition.

DC offset:

Offset range:

0Hz~15MHz: output amplitude>2V -9.99V~9.99V

0Hz~30MHz: 0.2V 0Hz~40MHz: –

0Hz~60MHz: 0 Offset resolution: 0.01V

Phase parameters:

Phase range: 0~359.9°

Phase resolution: 0.1°

TTL/COMS output:

Low level: <0.3V High level: 1V~10V Level rise/fall time: ≤20ns External measurements: Frequency meter: Frequency range: 1Hz~100MHz Accuracy: gate time continuously adjusted between 0.01s~10s Counter: Counting range: 0~4294967295 Coupling mode: 2 kinds of coupling modes: DC and AC Counting mode: manual operation Input signal voltage range: 2Vpp~20Vpp Pulse width measurement: 0.01ns resolution, 20s MAX. measuring time Period measurement: 0.01ns resolution, 20s MAX. measuring time Sweep function: Sweep channel: CH1 or CH2 Sweep type: linear sweep, log sweep Sweep time: 0.1s-999.9s Setting range: arbitrarily set between start point and stop points Sweep direction: forward, backward and roundtrip General parameters: Display: display type: 2.4″ TFT color LCD Storage and loading: Quantity: 100 Groups Location: 00 to 99 (default extract 00 data at boot-up state） Arbitrary wave: quantity: 1 to 60, totally 60 groups (default 15 groups at boot-up state) Interface: Interface type: USB serial interface Extension interface: serial interface of TTL level mode, convenient for secondary development Communication rate: adopt standard 115200bps Communication protocol: using the command line, the agreement public Power supply: voltage range: DC5V±0.5V Environmental conditions: temperature: 0℃~40℃; humidity: <80% Item size: 195 * 175 * 70mm / 7.67 * 6.9 * 2.75in Item weight: 542g / 1.2lb Package size: 240 * 210 * 95mm / 9.45 * 8.3 * 3.74in Package weight: 986g / 2.2lb