Switchgear & Protection Trainer

Auto re-closer (Electromechanical)
– 1-Φ, 230V, 2 Amp, 50 Hz, Reclosing Duration 5-180 Seconds adjustable

Reclose times 2-10 Adjustable. Under voltage / over voltage protection relay
– Excitation voltage: 180-240 volt
– Input voltage (Under/over range): 160-280V Adjustable

Current handling capacity: 0-5 Amp
– Frequency: 45-60 Hz.
Under current / over current protection relay with auto re-closure
– Excitation voltage: 180-240 volt
Under current / over current range: 0-5 Amp Adjustable

Voltage handling capacity: – 160-280 Volt
Frequency: 45-60 Hz.
Under frequency / over frequency protection relay
– Excitation voltage: 180-240 volt
Under frequency / over frequency range: 35-60 Hz Adjustable

Voltage handling Capacity: 160-280 Volt
– Current handling capacity: 0-5 Amp.
Reverse Phase Sequence Protection Module
3- Φ, 400-440V volt, 3 Amp, 50 Hz.
Transformer over heat Protection Module
– Excitation voltage: 180-240 volt, 1-Φ, 230V, Temperature 10°C-100°C,10 Amp, 50 Hz.
Auto Y-Δ Starter
– 3- Φ, 400-440V volt, 5 Amp, 50 Hz.

Squirrel Cage Induction Motor
– 400V, 0.7A, 3Φ, 50 Hz, 190W (Min), 1380 rpm. Copper conductor, SS shaft, Aluminium yoke,
– All terminals are on front plate.
– Use for educational experiment purpose.
DC Motor/ Generator
– Motor Rating: 200V DC, 1.5A, 200W (Min), 1500 rpm Shunt field rheostat (for speed control).
– Generator Rating: 150V DC, 0.75A, Shunt field rheostat (for voltage control) Prime mover speed 1500rpm.
– Copper conductor, SS shaft, all terminals are on front plate.
– Use for educational experiment purpose.
Synchronous Motor/Generator
– DC Excitation in rotor circuit winding type: Lap winding, single layer.

Motor Rating: 3 Phase, 415V, 0.5A-1.5A, 190W (Min), 50 Hz, 1500 rpm,

Generator Rating: 3 Phase, 415Volt, 200VA (Min), 0.25A-1.5A, 50Hz, 1500 rpm.
– Copper conductor, SS shaft, Aluminium yoke,
– All terminals are on front plate.
– Use for educational experiment purpose.

Power Supply
– AC 3 Phase, 4 Wire, 440Volt (Max), 230 Volt 10A, Variable 0-440Volt, 4Amp, DC: 240Volt (Max), 10A (Max), Variable 0-240Volt, 5Amp,
– All terminals are on front plate, Use for educational experiment purpose.

Mobile CONSOL (Work Station)
Dimension:

– Wheel mounted, one double size, four full size, three half size module cabinet, one door cabinet with lock, Auto release & sliding tray, Use for educational experiment purpose.

– Connecting Cables-Cable length 01 yds. With both & Staking plugs -50 pcs.