Industrial Multiple PLC Trainer

List of Experiments:
– The construction of nine different categories PLC.
– Interfacing method of nine different categories PLC.
– Programming method of nine different categories PLC.
– Pick & Place using PLC & Pneumatic Air Suction method.
– Pick & Place using PLC & Pneumatic Gripper method.
– Water Pump Control using nine different categories PLC.
– Fire Indication System using nine different categories PLC.
– Traffic Light Control using nine different categories PLC.
– The construction of Pneumatic cylinder.
– Sequential control of three Pneumatic cylinder using nine different categories PLC.
– The construction of Pneumatic solenoid valve.
– Control of Pneumatic solenoid valve using PLC.
– Interfacing of PLC & Pneumatic solenoid valve.
– The method of Control Relay using PLC.
– The methods of three phase Induction Motor Starter using PLC.
– Forward-and-reverse operation methods of three phase Induction Motor.
– The method of interfacing PLC with Input Switch.
– The method of interfacing PLC with Input Sensor.
– Operating method of interfacing proximity sensor with PLC.
– Operating method of interfacing photo sensor with PLC.
– Use of Variable Frequency Drive with PLC.
– Programming method of Variable Frequency Drive with PLC.
– The construction of Three Phase Induction motor.
– Interfacing Method of Three Phase Induction motor with VFD & PLC.
– The construction of Stepper Motor.
– Interfacing Method of Stepper Motor with PLC.
– The construction Seven Segment Display.
– Interfacing Method of Seven Segment Display with PLC.
– Interfacing Power Supply with nine different categories PLC

Technical Specifications:

Main Structure:
– Main Voltage : 1 Phase 220V per 50 or 60Hz
– Working Table: 1EA
– Working Frame – 3 Step
– Module Storage Cabinet : 2EA
– Electric accessories Storage Cabinet : 1EA
– Ari Compressor : 1EA
– Air compressor (basic equipment minimal machine): power: AC 220V(Plus or Minus)10 percent 50Hz or 60Hz,motor power: 650W
– Nominal volume Air compressor: 9L normal output Pressure 0.7 MPa, noise degree: 66 dB
– Dimension :L x W x H (mm):1735 x700 x 1660
– Connection facility 2mm & 4mm Safety Socket

PLC Category –

-PLC: SIEMENS
-Part Number: 6ED1052-1MD00-0BA8
– Programming Language: Ladder, Functional Flow Chart Diagram
– Built in Ethernet communication
– PLC Power supply: (1 No.)
– PLC Digital Input: 08
– PLC Analog Input: 04 Nos
– PLC Analog Output: 02 Nos
– PLC Digital output: 04
– PLC Display Unit : YES
– PLC Input Voltage: 24VDC, 1Amp
– Permissible range, Lower limit(DC): 20.4V
– Permissible range, Upper limit(DC): 28.8V

– Programming Software: LOGO Soft Comfort or equivalent

– Programming Cable: PLC to PC communication Cable

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

PLC Category-02

-PLC: Mitsubishi

-Parts:FX3U-16MR-DS

– Power Supply: 24VDC

– Input Types:24VDC

– Output Types: Relay

– Communication Options: RS-232 , RS-485, RS-422, USB

– CPU Functions: High speed counters, 32 bit floating point math

– Program Memory Byte (Step): 128 K max. (64,000)

– Ambient Temperature: 0-55 degree C (in operation) -20 (Plus or minus)70 degree C (in storage)

– Ambient Humidity: 5-95percent RH, no condensation (in operation)

– Noise Immunity: 1000 Vpp noise voltage, 1 microsecond pulse width at 30-100Hz

– Digital Input: 8

– Digital Output :8 (Relay)

– Programming Software: Gx-Developer or equivalent

– Programming Cable: SC-09 or equivalent

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

PLC Category-03

-PLC: Fatek

-Parts: – FBs-14MAR

– PLC input: 8 points Digital

– Triggering Power:24VDC

– (2 points high speed 100KHz, 2 points medium speed 20KHz, 4 points medium speed total 5KHz);

– PLC Output: 6 points relay

– Communication Port:RS232,USB

– Built-in power supply: SPW14-AC or D12 or D24

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

PLC Category-04

-PLC: Omron

-Parts: CPM1A-30CDR-A-V1

– Power Supply=220VAC

– Triggering Voltage:24VDC

– Digital Input=18

– Digital Output=12(Relay)

– Programming Cable: PLC to PC communication Cable

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension: L x W x H (mm):295 x 225 x 45

PLC Category-05

-PLC: Delta

-Parts: dvp10ec00r3

– Power Supply:220VAC

– Triggering Voltage:24VDC

– Digital Input:06

– Digital Output:04(Relay)

– Programming Cable: PLC to PC communication Cable

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension: L x W x H (mm):295 x 225 x 45

PLC Category-06

-PLC: Allen Bradley

-Parts No: Micro820

– PLC Digital Input:12 Nos

– PLC Digital Output:07 Nos

– PLC Analog Input:04 Nos

– PLC Analog Output:01No

– 20-point controllers

– Provides embedded 0…10V non-isolated 4 channel analog input and 1 channel analog output for speed control of an AC drive

– Provides embedded communications via non-isolated serial port (for RS-232 and RS-485 communications) and Ethernet port

– Communicates via Ethernet or IP

– Provides embedded micro SDTM slot for program transfer, data log, and recipe management

– Provides embedded support for up to four 10k thermistor temperature inputs

– Supports program download through USB with an optional 3.5-in. Remote LCD

– Supports up to two Micro800 Plug-in Modules

– Programming Cable: PLC to PC communication Cable

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension: L x W x H (mm):295 x 225 x 45PLC

Category-07

-PLC: LS

-Parts: XBC-DR30SU

– Power Supply=220 V AC

– Digital Input =18

– Digital Output=12(Relay)

– Triggering Voltage:24VDC

– Programming Cable: PLC to PC communication Cable

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension: L x W x H (mm):295 x 225 x 45

PLC Category-08

-PLC: Schneider Electric

-Parts: SR3B101BD or AFPX-C40R

– Built in display: LCD

– High-speed Operation

– Number or control scheme lines

– Maximum Number of I & O Points:

– 0…500 with FBD programming

– 0…240 with ladder programming.

– Cycle time : 6…90 ms

– Backup time : 10 years at 25 degree C

– Checks : Program memory on each power up

– Supply voltage limits : 19.2…30 V

– Discrete input voltage : 24 V DC

– Discrete input current : 4 mA

– IP degree of protection : IP20 (terminal block) conforming to IEC 60529

– Mechanical durability : 10000000 cycles (relay output)

– Output thermal current : 8 A for all 4 outputs (relay output)

– Number of outputs : 4 relay output(s)

– Discrete input number : 6 conforming to EN or IEC 61131-2 type 1

– Programming Cable: PLC to PC communication Cable

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

PLC Category-09

-PLC: Wecon

-Parts: LX3V-0806MR-A2

– Power Supply=220VAC

– Digital Input=8

– Digital Output=6 (Relay)

– Triggering Voltage:24VDC

– Programming Cable: PLC to PC communication Cable

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

PLC Pick & Place using Pneumatic Air Suction Module:

– Base Plate: Aluminum Profile

– Structure: Aluminum Profile

– Function Indicator: Tower Type (Red, Green, Yellow)

– Carry Function: Using Air suction method

– Pneumatic cylinder: 02 Pcs

– Optical Fiber Sensor:02 set

– Solenoid Vaulve:3 pcs

– Cabinet control circuit power supply: DC24V

– Temperature: -10 to 40 ; Humidity: getter than or equal 90 percent ;

– Air pressure: 0.4 to 0.6Mpa

– Input power : single-phase, three-wire AC 220V(plus minus)10 percent 50Hz or 60Hz

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):600 x 460 x 20

PLC Pick & Place using Pneumatic Gripper Module:

– Base Plate: Aluminum Profile

– Structure: Aluminum Profile

– Function Indicator: Tower Type (Red, Green, Yellow)

– Carry Function: Using pneumatic gripper method

– Pneumatic cylinder: 02 Pcs

– Optical Fiber Sensor:02 set

– Solenoid Vaulve:3 pcs

– Cabinet control circuit power supply: DC24V

– Temperature: -10 to 40 ; Humidity: greater than or equal 90percent ;

– Air pressure: 0.4 to 0.6Mpa

– Input power : single-phase, three-wire AC 220V plus minus 10 percent 50Hz or 60Hz

– Connection facility 2mm & 4mm Safety Socket

– Module Dimension : L x W x H (mm):600 x 460 x 20

Water Pump Control Module:

– Base Plate: Aluminum Profile

– Water Chamber: Upper And Lower

Water through: Solenoid Valve

– Water Pump: 5W

– Operating Voltage : 24VDC

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension : L x W x H (mm):600 x 460 x 20

Fire Indication System Module:

– Smoke Sensor

– Interfacing PLC and DC power supply Connection facility

– Interfacing facility With water level control Module

– Operating Voltage : 24V

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Traffic Light Control Module:

– Built-in ,Green, Yellow, Red Indicator for interface PLC and DC power supply Connection facility

– Operating Voltage : 24V

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Pneumatic Control Module:

– Pneumatic cylinder: 3EA

– Temperature: -10 to 40 ;

– Humidity: greater than or equal 90 percent ;

– Air pressure: 0.4 to 0.6Mpa

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Pneumatic solenoid valve Module:

– Pneumatic solenoid valve: 3EA

– Operating Voltage : 24V

– PLC connection point : 3EA

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

– Interfacing facility Pneumatic control Module

Relay Control Module:

– Double pole Double Through Relay: 04 Set

– Relay Operating Voltage:24V

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

–

Motor Starter module:

– Magnetic Contact switch:02 nos

– Star Delta Status Indication facility

– Relay Operating Voltage:220V to 240VAC

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Input Switch Module:

– Pushbutton Switch:04 Nos

– Push on Push Off Switch: 04 Nos

– Relay Operating Voltage:24VDC

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Sensor module:

– Proximity Sensor:02 Nos

– Photo Sensor:02 Nos

– Thermocouplar:02 Nos

– Operating Voltage:24VDC

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Output Indicator Module:

– Output Indicator:04 Nos

– Operating Voltage:220V~240VAC

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Variable Frequency Drive Module:

– Variable Frequency Drive:01 No

– Input Three Phase/Single Phase

– Output Three Phase 220VAC (PWM)

– Capacity:400watts

– Input Operating Voltage:220V~240VAC

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Three Phase Induction motor Module:

– Three Phase Induction Modeule:01 No

– Connection system : Delta

– Input Operating Voltage:220V~240VAC

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Stepper Motor Control Module:

– Unipolar Stepper Motor:01 No

– Bipolar Stepper Motor:01 No

– Input Operating Voltage:5V/12V

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Seven Segment Display module:

– Seven Segment Display:02 no

– Input Operating Voltage:5V & 12V

– PLC Connection facility 2mm & 4mm Safety Socket

– Module Dimension :L x W x H (mm):295 x 225 x 45

Power Supply Module:

– Input Operating Voltage:220V~240VAC

– Output AC Voltage:220V,50Hz

– Output DC Voltage:5V(1Amp),12V(1Amp),24V(1Amp)

– PLC connection point facility 2mm and 4mm Safety Socket

– Fuse for Safety protection facility.

– PC: Intel Core i5 13th Generation processor, 16GB RAM, 1TB HDD, 512GB SSD, 19 Inch Monitor, Keyboard and Mouse.

Accessories:

– Air Compressor-01 no

– Connecting jack 2mm & 4mm : 01 Set

– Power Cable: 01 no

– PLC to PC Communication cable: 09 Sets

– Simulation software for compatible PLC

– English Manual & CD: 01 Set