Brand: CL
Model: ZE3102
Pictures are for reference only.
I. Transformer Training Workbench, Educational Equipment Laboratory Training Equipment Overview
This training set include various of transformers, students can be familiar with various types of transformers features, control principles, and knowledge through training and experiments. It is suitable for students in vocational schools, technical schools, colleges.
II. Transformer Training Workbench, Educational Equipment Laboratory Training Equipment Technical parameter
Features:
1 It have hands-on training in the use of components being used in the field
2 It is composed of 3-phase transformer, 3-phase load resistor, 3-phase variac and I/O measuring meters
3 It have semitransparent front panel in the see-thru structure capable of observing wire connections inside the system
4 It support open architecture in the rear side of the system for easily checking the components and wire connections
5 It have forced ventilation system to effectively suppress heat caused by loads during the course of experiments.
Experiments can be performed:
Voltage regulation
No-load loss measurement
Regulation efficiency calculation
Maximum efficiency measurement
The polarity of transformer
Y-Y electrical connection practices
A-A electrical connection practices
A-Y electrical connection practices
Y-A electrical connection practices
V-V electrical connection practices
Operational practices on transformer (series / parallel)
Technical Specifications:
Input voltage:
3-phase AC 220V
Circuit breaker: lea
Power indicator lamp: 3ea
Variac (variable power):
Power range: 0~240V (3-phase)
Input terminal: R, S, T
Output terminal: U, V, W, N
Transformer:
Rated capacity (500VA): 3ea
Primary: 0V/110V/220V
Secondary: 0V/110V/220V
Input measuring meter:
Voltmeter (0~300V): 3ea
Ammeter (0~3A): 3ea
Wattmeter (0~750W): lea
Output measuring meter:
Voltmeter (0~300V): 3ea
Ammeter (0~3A): 3ea
Wattmeter (0~750W): lea
Load resistor (Switch control type):
2002/400W: 3ca
4002/200W: 3ea
6002/300W: 3ea
Following accessories should be supplies as standard:
Power cord: lea
Connection cable: Iset
User’s guide & experimental manual: lea
3D Simulation Software for Electrical Works
Learning creation (production tool) function
1) It should possible to directly create learning materials for lecture in the slide format.
2) Should easily create audiovisual materials by insert images, 3D modeling, video, sound, text, and animation effects.
3) The animation function makes it possible to create materials for step-by-step practices.
4) 3D modeling type parts should be inserted, so it should easy to explain the shape and operation method of the actual components.
Theory study function
1) Easily learn about electrical circuits through essential data on basic circuits
2) It should provide the same questions and drawings from the previous electrician qualification tests (total 7 test examples), thus increasing the adaptability to your test.
3) Basic learning materials: 26 types in total
Sequence control basic theory: 6 types
• Sequence control
• Electrical wiring tools
• Protective device
• Operation switch
• Detection switch
• Operation device
• Output device (load)
Sequence control circuit practice: 9 types
• Basic circuit
• Indication circuit
• Logic circuit
• Self-holding circuit (memory circuit)
• Alarm circuit
• Timer circuit
• New input-priority circuit
• Sequential control circuit
• Interlock circuit
Previous questions from the electrician qualification tests (2008-2019): 7 types 3D parts library
• Circuit breaker and fuse: 4 types
• Terminal block: 7 types (rotatable)
• Control box: 4 types (rotatable)
• Pushbutton switch: 5 types
• Lamp type switch: 5 types
• Selector switch and toggle switch: 4 types
• Other switches (limit, emergency): 2 types
• Indicator lamp: 5 types
• Other devices (emergency bell, emergency light, buzzer): 3 types
• Relay: 13 types
• Electric motor: 6 types
• Should be supplied VR device to practice virtual reality and obtain the same effect as practicing using the real-life components. VR device and PC should work together. Circuit create in PC should be implemented on the VR device.
Accessory PC
1) OS: Windows 7 32bit/64bit (Windows 10 is highly recommended.)
2) CPU: Intel i5 6th generation or later
3) HDD: 2GB or more
4) RAM: 8GB or more
5) Graphics card: NVIDIA GTX 660 or higher
3. Accessories
1. User manual: lea
2. USB memory stick (with the installation software):
Be the first to review “Transformer Training Workbench”
Related products
Electrical Lab
Electrical Lab
Electrical Lab
Electrical Lab
Sale!
Electrical Lab
Original price was: $12.00.$10.00Current price is: $10.00.
Electrical Lab
Electrical Lab
Electrical Lab
Reviews
There are no reviews yet.